The best phone holders for electric scooters

Every year more and more people buy electric scooters. And it is not surprising, because such a vehicle has a lot of advantages. They are light and compact, easy to manage, allow you to develop a fairly high speed and do not require much physical activity, as on a bicycle, where you want to constantly pedal. For them, there are many accessories, and deserves special attention phone holder for an electric scooter. Thanks to it, you will not have to hide your smartphone in your pocket during the trip, because it will be attached to the handlebars.

How to choose a good mount?

The steering wheel phone holder is a very simple device, usually made of plastic or metal. However, preference should be given to quality models, made of durable materials and have parts that are resistant to wear and tear for a long time. After all, falls are not excluded, as a result of which the device can break.

You should also pay attention to the convenience and reliability of the attachment of such a device on the steering wheel. It should not move when driving on a rough road, and the process of installing and removing the smartphone should not take much time.

And, of course, it is worth considering the size. For a bicycle or scooter phone holder should not take up too much space on the handlebars and at the same time hold a device with a large screen diagonal.

How to securely fasten your phone to the handlebars of an electric scooter

smartphone holder for xiaomi electric scooter

It all depends on the type of device. Mostly clamps are used. They can be spring-loaded or screwed together.

  • Springs are notable for easier insertion and removal. It will be enough to pull such a clamp by hand to install or remove the mobile device.
  • Screw clips require more time for removal and installation, because you have to unscrew the nut or screw. But, they provide a more reliable fixation and will not allow the phone to fall down when driving on an uneven road.
  • There are also holders that hold the mobile device with flexible frames. To secure it, the phone is placed in the center of such a device, and then the fixing frames are thrown over it from above and below.

Ninebot by Segway phone holder

Ninebot by Segway phone holder

Buy on AliExpress

BUY ON I.MART

This is the original Ninebot holder for electric scooters, which was developed by the manufacturer himself. But it can be easily installed on devices of other brands as well. This holder is made of shockproof plastic and is not subject to wear and tear for a long time.

The rotating bracket provides secure fixation on the handlebars and allows you to rotate the device through 360 degrees. The length-adjustable clips allow you to securely hold a smartphone with a screen diagonal up to 6.5 inches. Clips are equipped with rubber pads, which eliminates the possibility of scratching your smartphone.

Key Features:

  • Material: ABS/rubber.
  • 4 clips.
  • Angle of rotation: 360⁰.
  • Rudder size: 0.7 to 1.4 inches.
  • Smartphone size: 4.7 - 6.5 inches.

Pros:

  1. Secure fit
  2. Quick installation and removal
  3. Rubber pads
  4. Versatility

Cons:

  1. Not detected

 You'll be interested: Why it is important to charge the battery of an electric scooter correctly

Promend handlebar mount for smartphone

Smartphone holder for Promend electric scooter handlebars

Buy on AliExpress

Buy on Ya.Market

This ring holder is remarkable for its compactness, so it won't take up much space on your handlebars. It comes in several colors, is made of high quality aluminum alloy, so it is highly durable and will fit smartphones up to 85 mm wide and for electric scooters Xiaomi, Kugoo and other manufacturers.

But it should be borne in mind that the location of the mobile device, due to the design of such a device, involves only the horizontal position.

Key Features:

  • Material: aluminum/rubber.
  • 2 clips.
  • Rudder size: 22.2 - 31.8 mm.
  • Smartphone size: 58 - 85 mm.
  • Weight: 129 g.

Pros:

  1. Rugged case
  2. Compact size
  3. Rubber pads

Cons:

  1. Only horizontal position of the phone

Aluminum Untoom mount

Aluminum phone mount for Untoom scooter

Buy on AliExpress

Buy on Ya.Market

This holder will fit Kugoo, Xiaomi, Ninebot and other manufacturers' scooters, where the handlebar diameter ranges from 22.2 mm to 31.8 mm. The design of the device allows it to fit from the most compact, to huge smartphones. Locking is excellent and even when driving off-road the phone will be securely clamped and will not fall out. A presence of rubber inserts in the clips eliminates the possibility of scratches.

Key Features:

  • Material: aluminum/rubber.
  • 3 clips.
  • Angle of rotation: 360⁰.
  • Rudder size: 22.2 - 31.8 mm.
  • Smartphone size: 3.5 - 6.5 inches.
  • Weight: 100 g.

Pros:

  1. Secure fit
  2. Rubber pads
  3. Versatility
  4. Quick installation and removal

Cons:

  1. It's hard to tighten the screw

LuazON Rotating Silicone Holder

Silicone bicycle phone holder

Buy on AliExpress

Buy on Ya.Market

This smartphone holder for electric scooter does not cover the connectors and buttons, allowing you to charge your phone, connect headphones to it, adjust the sound, turn the screen on and off during the ride. The holder is designed with 8 points for a secure fit and can rotate the device 360 degrees. So you can install it vertically, horizontally or at an angle.

Key Features:

  • Angle of rotation: 360⁰.
  • Steering wheel size: any size.
  • Smartphone size: 4 - 6.5 inches.

Pros:

  1. Secure fit
  2. 360 degree rotation
  3. Fits on any steering wheel

Cons:

  1. Can cover part of the screen

 Read also: The best apps for electric scooters

Baseus Universal Gravity Holder

Baseus Universal Holder for Scooter Bars

Buy on AliExpress

Buy on Ya.Market

Baseus is quite a well-known brand that is known for its quality. The company has developed a fairly good and versatile holder for the phone, which is installed on the handlebars of a scooter (or ordinary bicycle).

The mount can rotate 360 degrees, has rubber pads that protect against scratches, and is suitable for most electric scooters and smartphones with a screen diagonal from 4.7 to 6.5 inches. And also, it has a fairly deep capacity, which will fit not only the phone, but also powerbank.

Key Features:

  • Material: aluminum/rubber/ABS.
  • 2 clips.
  • Angle of rotation: 360⁰.
  • Steering wheel size: any size.
  • Smartphone size: 4.7 - 6.5 inches.

Pros:

  1. Rubber pads
  2. Versatility
  3. Quick installation and removal
  4. Mirror mount
  5. Rugged case

Cons:

  1. Not detected

FAQ

How to choose the right size holder?

Before buying, you should measure the diameter of the handlebars of your scooter using a ruler or caliper, as well as the width and diagonal of your smartphone. Better yet, get a universal holder that fits many models.

What materials should the construction be made of?

It is best if the mount is made of aluminum or impact-resistant plastic. This will protect the device from scratches, cracks and chips.

How do I install the handlebar holder?

For scooters there are 2 options: with a length-adjustable strap or a bolt-on attachment. It is preferable to choose the second option, as it provides a more reliable fixation and is unlikely to untwist during the trip.

Video review

The smartphone holder is a useful device that every owner of an electric scooter should have. It will allow you to see in front of your eyes all the necessary information from the screen of your mobile device. The main thing is to remember about safety and not to be distracted by your phone while driving.

You may also like

Leave a Reply

Your email address will not be published.

This site uses cookies to improve the user experience. By continuing to use gyro-gadgets.com, you consent to these cookies. Adopt More